Navigation

sail Online
Visited by mobile
back top

What Should We Do If The Putty Spraying Machine Is Blocked?

Date:17/09/2018   View: 470   Tags: Putty Sprayer Putty Spraying Machine Spraying Machine

What Should We Do If The Putty Spraying Machine Is Blocked?

If the slurry is too dry or the machine is too long to be cleaned, it can cause blockage. The onset of obstruction is also one of the causes of overload. In this case, it is necessary to clear the obstruction. Turn off the power first, and immediately disassemble the spray gun or transport the hose. Otherwise, the infinite pressure inside the tube will be released from the disassembly, and the risk of explosive sanding will occur.


1. Turn the power supply to the direction of rotation.

2. Press the button to turn on the machine and turn the machine for about 30 seconds to lower the pressure inside the transport tube.

3. Remove the gun and clean it. Check if the nozzle is blocked.

4. Turn the power switch to forward and turn it on.

5. If the delivery hose is not delivered, it is clarified that the pipe is blocked, and the clean and clean spray gun is connected, so that the spraying operation can be continued.

6. If the delivery hose is not delivered, it is clarified that it is blocked inside the tube, and it can be repeated several times to open the positive rotation. If there is still no material to be sent out, remove the transport tube for cleaning and unblocking, and remove the transport hose. It is necessary to dry it after opening and reversing.

7. Connect the unblocked transport pipes, then adjust the button to forward and restart the operation.

Menu

Hot News

skype sail Online Email:sales@chinacoalintl.com
menu
Home Products Top

+

+

Please leave a message


skype sail Online Email:sales@chinacoalintl.com
menu
Home Products Top

+

+

Please leave a message