8 KN air scraper winch

8 Ton Air Driven Scraper Winch
Air Tugger

Widely used in underground or open air to move the ores or fill staffs at the metal mines or other kind of mines.

Product Introduction

Air scraper winch is just suitable to the parallel transportation on ground, or the slopes within 500; Not be the hoisting machines.

The main components of the winch :deceleration device, main roll, Vice reel, control devices, wire guiding device and motor. These parts were installed inside and outside the shell, the shell is a good steel part to protect the supporting role,also to bear all the load. It is connected on the basis of two slide bolt.

Technical Characteristics

This winch is powered by compressed air and it can be manually controlled. It's driven by the blade air motor and slowed down by gears. And it can rotate the drum to meet the working requirement by usage of braking the annular gear.

This winch is equipped with one foot valve.When on operation, step the foot valve first, the winch start working, and then control the operation by handles.When off operation, release the foot valve, the winch stop working, it can achieve a longer life for the winch and air motor.

Technical Parameters

Item		Parameter	Unit
Working pressure		0.69-1.0	MPa
Traction		8	kN
Max rope speed		32	m/min
Air motor	Rated power	7.5	kW
Air motor	Rotating speed	1200	rpm
Drum	Diameter	205	mm
	Length	150	mm
	Wheel flange diameter	350	mm
Wire-rope diameter		9.3	mm
Rope capacity		45	m
External dimension	L × W × H	920×675×475	mm
Working Condition	Temperature	-10 +60	°C
	Humidity	100%
	Wind speed wave height	6 / 2	level/M
Weight		360	kg

Product Feedback

Average Star Rating:

History Feedback: (${page.list})

Latest Feedback

　First Pre 1 Next Last

Star Rating:

Contact*

Email *

Phone*

Message*

Verification code: Click to replace the verification code.

Refresh