A, Film quality of Airless Paint Coating Spraying Machine is good, the coating is smooth and
delicate, no brush marks. It will spray paint spray into fine particles, so
that it is evenly distributed in the wall surface, so that the formation of
latex paint on the wall smooth, smooth, dense coating, no brush marks, rolling
marks, this is the brush, rolling and other original method can not match.
B, High coating efficiency. Single operation spraying
efficiency of up to 200-500 square meters / hour, is a manual brush 10-15
times.
C, Good adhesion, long coating life. Airless Paint Coating Spraying Machine uses high
pressure injection, so that the atomization of paint particles to obtain a
strong kinetic energy; coating particles to take the kinetic energy into the
pores, so that the film is more compact, thereby enhancing the film and the
wall of mechanical bite force, improve coating adhesion, effectively extend the
coating life.
D, Uniformity Film thickness , high utilization rate of
paint. The thickness of the manual brush roll is very uneven, generally in the
30-250 micron, the paint utilization is low; while no gas spraying is easy to
get a thickness of 30 microns coating.
E, Easy to get to the corner and the gap. Due to using
high-pressure airless spray, spray paint and air free, the coating is easy to
reach corner, crevice and bumpy hard brush etc. parts, especially to have a lot
of air conditioning and fire fighting pipeline office smallpox more suitable,
rolling brush is very difficult construction.
F, Spray high viscosity paint, and hand brush, air
spray and so on are only suitable for low viscosity paint. With the development
of economy and the change of people "s concept, it has become fashionable
to use middle and high grade internal and external wall paint instead of mosaic
and ceramic tile to decorate wall. Water emulsion paint, due to its non
toxicity, easy to clean, rich color, the environment pollution, and began to
become the most popular inside and outside wall decoration materials. But latex
paint is a kind of high viscosity water paint. Construction, the general
production factory have to dilute the original paint water has a very strict
limit, generally 10%-30% (can be a little more water and does not affect the
performance of the special formula coating, product specifications will be
written. Transition dilution can result in a bad film, its texture and
resistance to scrub, durability will be subject to different degrees of damage.
The degree of damage is proportional to the dilution. Such as strict accordance
with the requirements of the manufacturers, the viscosity of latex paint is
very high, the construction is difficult. As with a roller, brush or air
spraying, the surface effect is not satisfactory. And the most popular way in
foreign countries is the use of high - pressure gas - free spraying machine to
construction.