Working Principle of Air Operate Lifting Winch for Oil Field
1, To start Air Operate Lifting Winch for Oil Field, first start pneumatic motor, and then drive gear runs. Before starting, you should first stopped on the roller brake, release the brake on the gear, so do not turn the reel, only the large internal gear rotation.
2, If you want to start the roll, you must first loosen the roller brakes, then brake tight on a large internal gear. Then the roller rotation and rope wrapping for work.
3, During working process of air winch, if you want pneumatic winch suspend operation, you can loosen the large internal gear brakes, then brake tightly the roller brake band
4, Electric car is in motion, two brake not both brakes, or likely to cause the motor burned.
5, Pneumatic winch roller brakes and bearings temperature should not exceed 70 ℃, if the temperature rose sharply, you must immediately stop checking.
6, In order to prevent the intrusion of dust and oil spills, pneumatic winch sealing device must be intact.
Main Parameter of Air Operate Lifting Winch for Oil Field
|
Type
|
JQYS-5X12
|
JQYS-10X16
|
JQYS-20X10
|
JQY-3x12
|
JQY-5X18
|
JQY-10X16
|
|
Safe working Loads S.W.L.（Kg）
|
500
|
1000
|
2000
|
300
|
500
|
1000
|
|
Hoisting speed（M/MIN）
|
0-12
|
0-16
|
0-10
|
0-12
|
0-18
|
0-16
|
|
Wire rope DIA.(φ)×Capacity(m)
|
8 X 50
|
12 X 50
|
14X70
|
6 X 45
|
8 X 50
|
10 X 50
|
|
Air motor (KW)×(rpm)
|
3 X 800
|
4 X 500
|
6 X 500
|
1.5 X 4000
|
3 X 3200
|
6 X 3200
|
|
Air pressure（MPa）
|
0.6
|
0.6
|
0.6
|
0.6
|
0.6
|
0.6
|
|
Gas volume（m3/min）
|
4
|
6
|
8
|
2.1
|
4
|
8
|
|
Air input size（G”）
|
3/4
|
1
|
1
|
1/2
|
3/4
|
1
|
|
Net weight（Kg）
|
120
|
160
|
395
|
45
|
85
|
160
|
Figure Picture of Air Operate Lifting Winch for Oil Field
