Introduction of PC5I Rotor Wet Concrete Shotcrete Machine
PC5I Rotor Wet Concrete Shotcrete Machine is mainly used in iron (public) road tunnel project. Equipment is easy to operate, low dust, low rebound, protect the environment and improve the quality of shotcrete, a special vibration hopper can successfully enter the concrete batching system.
Feature of PC5I Wet Concrete Spraying Machine
1. Through type rotary, non-sticky, unobstructed discharge, high efficiency and time-saving.
2. Four-point clamping device makes it easy to adjust the press between sealing plate and rotor disk so as to reduce air and dust leak and prolong consumption parts life.,
3. PC5I Wet Shotcrete Machine using low-tension, high-speed vortex pneumatic transportation, so the spraying flow is even, continuous and steady. It's good to improve the shotcrete quality.
4. The new nozzle, discharge elbow device, improving spray deposition effect, less resilient, high quality shotcrete.
Technical Parameter of PC5I Rotor Wet Concrete Shotcrete Machine
Model
|
PC5I Rotor Wet Concrete Shotcrete Machine
|
Capacity
|
5m3/h
|
Conveying dist. max.
|
100/30m
|
Suitable mixture ratio
|
cement/sand and gravel=1:3~5
|
Suitable water and cement ratio
|
>0.20
|
Aggregate size max.
|
φ20mm
|
Conveying pipe ID.
|
φ51mm
|
Operating pressure
|
0.5Mpa
|
Air consumption
|
8 m3/min
|
Material feeding height
|
1.1m
|
Rotor rotation speed
|
11r/min
|
Motor type
|
YBK2-132M-6
|
Motor power
|
5.5kw
|
Motor rotation rate
|
960r/min
|
Voltage
|
380v or 660v
|
Machine gauge
|
600mm (customized)
|
Dimensions(Length×width×height)
|
1520×820×1280mm
|
Total weight
|
800kg
|
Pictures of PC5I Rotor Wet Concrete Shotcrete Machine