Introduction of 90KN Overhead Transmission 9T Hydraulic Puller Machine
90KN Overhead Transmission 9T Hydraulic Puller Machine is applicable to release wire, ground wire, cable in transmission line project.
Main Component of 90KN Overhead Transmission 9T Hydraulic Puller Machine
1. engine :Cummins (USA)water –cooled diesel engine .
2. main variable displacement pump ,main motor :Rexroth (BOSCH)
3. Reducer : Rexroth (BOSCH)
4. Main hydraulic valves: Rexroth (BOSCH)
5. Radiator :AKG
6. Hydraulic instrument :WIKA
7. Mating with model GSP1400 drum (order number :07125C)
Feature of 90KN Overhead Transmission 9T Hydraulic Puller Machine
1.infinitely variable speed and linepull control ,the pull in the rope can be read on the line pull gauge .
2.the max pull for conductor –stringing operation can preset ,automatic overpull protection system .
3.spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety .
4.hydraulic pull rope clamp ,replacing steel conveniently .
5.attached reel winder with automatically level wind .load and unload conveniently .
Parameter of 90KN Overhead Transmission 9T Hydraulic Puller Machine
Product
|
40KN hydraulic puller
|
Maximum linepull (kN)
|
90
|
Continuous linepull (kN)
|
80
|
Maximum linespeed (km/h)
|
5
|
Bullwheel bottom of groove diameter(mm)
|
Φ520
|
Bullwheel grooves number
|
7
|
Maximum suitable steelrope diameter (mm)
|
Φ20
|
Maximum through connector diameter (mm)
|
Φ60
|
Engine power /speed (kW/rpm)
|
121/2500
|
Dimensions (mm)
|
3500×2100×2500
|
Weight (kg)
|
4300
|
Images of 90KN Overhead Transmission 9T Hydraulic Puller Machine