Product Introduction
The belt stripped machine can strip general belt, such as rubber, fabric, canvas, cotton, EP, nylon belt. The conveyor belt stripped machine is used for fastening the joints falling off conveyor belts and cleaning the head adhesive layer.
Main Characteristics
1. By conventional method, please put the conveyor belt on the centerline, and the corresponding joint should be incised with knife, and then separate the first layer;
2. Put the conveyor belt stripped machine on an appropriate location and fix well by wire rope;
3. Connect with power supply;
4. Clamp the first layer with fixture; start motor and incise the stripped part properly;
5. After stripped the first layer, and repeat the above steps, strip the second and third layers.
Technical Parameters
1. Motor power: 0.75 KW
2. Linear velocity: 0.3 m / s
3. The largest Stripped width: 200 mm ( NN, EP Conveyor belt, ect), 400 mm (general belt)
Figure Photos
B/L of The History Trading