Introduction of Electric Railway Cutting Saw Rail Cutting Machine
DQG Electric rail cutting machine is suitable for cutting various types of rails. The quality of cutting section meets the requirements of railway industry standard. This model has the functions of preventing the abrasive wheel reversing device and the clamp from derailing, and can be carried out on the rails and the ground. It is convenient and safe to use.
Paramter of Electric Railway Cutting Saw Rail Cutting Machine
Detailed Parameters
|
Model
|
DQG-4
|
Gasoline Engine Power
|
4kW
|
Speed of Revolution
|
2880r/min
|
Grinding Wheel Specification
|
Φ 400×Φ 32×4
|
Weight
|
65kg
|
Spindle Speed
|
3060r/min
|
Cutting Time
|
60kg/m rail,≤120S
|
Safety operation rules of Electric Railway Cutting Saw Rail Cutting Machine
1, the operator must be familiar with the performance of the equipment, comply with the safety rules and regulations, prevent accidents.
2. Cutting machine must concentrate on the work, not only to maintain a clear mind, but also rational operation of electric tools.
3, the power supply line must be safe and reliable. The performance of the equipment must be carefully checked before use and ensure that the components are intact.
4. Wear appropriate work clothes. Do not wear loose work clothes. It is strictly forbidden to wear gloves and cuffs without buttoning.
5, the workpiece must be firmly clamped, and it is strictly prohibited to start cutting when the workpiece is not tightly clamped.
6, it is strictly prohibited to grind the burrs of the workpiece on the surface of the grinding wheel to prevent the grinding wheel pieces from cracking.
7. When cutting, the operator must deviate from the front side of the grinding wheel and wear protective glasses.
8. It is strictly forbidden to use the incomplete grinding wheel. Mars should be prevented from splashing and flammable and explosive materials should be kept away when cutting.
9. When clamping the workpiece, it should be clamped steadily and firmly. The protective cover must be installed correctly. After clamping, the machine should be turned on and run empty. There should be no jitter and abnormal noise.
10. When replacing a new cutting blade or grinding wheel blade in the middle, do not force the locking nut too hard to prevent the cracking of the saw blade or grinding wheel blade from happening unexpectedly.
11. In case of jitter and other faults, the machine should be stopped and repaired immediately. It is strictly forbidden to work with illness or after drinking. It is forbidden to wear gloves when operating. If dust is caused during operation, mask should be put on.
12, after processing, power supply should be turned off and 5S requirements for equipment and surrounding venues should be made.
Photos of Electric Railway Cutting Saw Rail Cutting Machine