Introducton of CMQS1-400/5.2S Coal Mine Pneumatic Deep Hole Drilling Rig
CMQS1-400/5.2S Coal Mine Pneumatic Deep Hole Drilling Rig takes the compressed air as the power source, and it is one light type deep hole pneumatic drilling device with caterpillar type walking structure.
This pneumatic drilling rig is widely used in the coal mine seam water exploration hole, water drainage hole, water injection hole, anchor-rod hole, gas exploration hole, gas drainage hole, pressure relief hole and other drilling construction.
Pneumatic Deep Hole Drilling Rig can match the use of the 69, 76, 89 high efficiency screw drilling rods and 42 geological drilling rods.
Features of CMQS1-400/5.2S Coal Mine Pneumatic Deep Hole Drilling Rig
(1). The coal mine drilling rig is the single column support one, it is not necessary to match another single hydraulic prop to fix the drilling machine. When the caterpillar does not move, it can adjust the body rotated 180°to the right lateral wall construction after having finished the left lateral wall construction.
(2) The drilling rig can achieve the automation from the body moving, direction adjustment, and the drilling angle adjustment (the original angle adjustment need to be adjusted manually), which reduces the labor intensity of the workers effectively.
(3) The size of the drilling machine is small, and it can move freely in a minimum 1.5 meters of narrow laneway.
(4) High degree of automation: in addition to achieve the rotation and feed by the air motor, it can also achieve a more humanized mechanical action; there is a rotary reducer below the middle column, it can achieve the horizontal hydraulic drive±180°angle adjustment; There is also a rotary reducer in the middle of guide rail and the bracket, to achieve the vertical hydraulic drive maximum rang -60 °~ 90 °angle adjustment; There is also a hydraulic cylinder below driving the guide rail lift.
Main Parameter of CMQS1-400/5.2S Coal Mine Pneumatic Deep Hole Drilling Rig
Model
|
CMQS1-400/5.2S
|
Drilling depth /m
|
75
|
Matched drill rod diameter /mm
|
69(76,89 optional)
|
Maximum feeding/
pulling force speed/kN
|
≥6.5
|
Feeding range /mm
|
1300
|
Main axle tilting angle/°
|
-60~+90
|
Rotation angle of the main machine/°
|
±180
|
Maximum output power / kW
|
5.2
|
Load gas consumption / m3/min
|
≤10
|
Working pressure /MPa
|
0.4
|
0.5
|
0.63
|
No-loaded speed /r/min
|
≥460
|
≥500
|
≥540
|
Retated torque / N?m
|
≥390
|
≥400
|
≥420
|
Retated speed /r/min
|
≥40
|
≥100
|
≥110
|
Maximum moving speed /km/h
|
15±5
|
Maximum gradeability /°
|
±18
|
Ground pressure /MPa
|
0.03
|
Noise(dB(A))
|
≤110
|
Machine weight/kg
|
1800
|
Dimensions / (L x W x H)/m
|
2770×1100×2440
|