Product Introduction
The detector generates a high DC voltage that is applied to the coating surface through a probe. The detector is connected to the substrate via the high voltage returned. When the probe is passed over a coating flaw, then the electrical circuit is completed and current flows from the probe to the substrate. As a result, audible and visual alarms are activated in the detector and a spark may be produced at the flaw.
Accessories
Charger, high pressure gloves, long cable, short connecting line, Connecting magnet, earth rod, The brush plate, Manual
Main Parameter
Characteristic
1. Low power consumption, small size, light weight；
2. Simple operation；
Main technical index
1. Measuring range:A:0.03-3.5mm（Epoxy coal tar pitch medium）
B:3.5-10.mm（Petroleum asphalt medium）
C:0.03-10.mm（Epoxy coal tar pitch、Petroleum asphalt medium）
3. Output high voltage:A:0.5-15KV
B:15-35KV
C:0.5-35KV
4. Display:pointer
5. High voltage control system:Ordinary potentiometer adjustment
6. DC supply:12v
7. Consumption:＜5w
8. Alarm delay:1-2s
9. High voltage probe:Electronic high voltage generator
10. Packing:metal chest
11. Main dimension: 165mm×155mm×68mm
12. Weight:1.5kg（Including battery）
Figure Photos
B/L of The History Trading
