MPC2-6 Flat Mining Car
Advanced design concept,
sophisticated production equipment
more >>
application
MPC2-6 Flat Mining Car
Due to different production batches and specific models, the above pictures are for reference only. For details, please contact our sales staff for specific verification.
Introduction
MPC2-6 Flat Mining Car
The mining flatbed itself has no power and needs to be towed by a tractor or forklift.
**MPC2-6 Flat Mining Car also extended his service life due to his variant single-row radial bearing.
MPC2-6 Flat Mining Car adopts a modified single-row radial ball bearing, which can still be used normally even in the case of extremely harsh environment, uneven roads and serious dust. The flatbed also extended his position because of his variant single-row radial bearing. Service life. At the same time, because the load-bearing structure of the flatbed is reasonable and simple, and the cost is low, it is favored by various mines and construction projects.
Maintenance Of MPC2-6 Flat Mining Car
-
Maintenance of MPC2-6 Flat Mining Car:
The proofreading and turning parts of the mine car must be filled with oil frequently. The oil filling of the wheel should be stopped every time the new oil is discharged from the oil drain hole. When the mine car is deformed and widened in the underground, it should be shaped in time.
Mine vehicles that have been shut down for a long time should be parked in a ventilated and dry place. Do not store in the open air, reduce sun and rain, reduce rust damage and increase service life.
-
Precautions for preventing malfunctions:
The failure of the mine car generally occurs during the operation, which often leads to serious accidents such as casualties and equipment damage. In order to reduce the occurrence of accidents, the vehicles and the wheels should be regularly inspected to minimize the use of the broken shaft and the fact that one wheel cannot move.
The periodic inspection period is determined by the use of each unit according to the transportation distance and the integrity of the track, so that the mine car can reach the normal service life or even extend.
Characteristics
MPC2-6 Flat Mining Car
01
MPC2-6 Flat Mining Car
Force balance Running smoothly
The modified single-row radial ball bearing can still be used normally under the condition that the environment is very bad, the road is not flat, and the dust is serious, which greatly prolongs the service life of the mining flat car bearing;
china coal
MPC2-6 Flat Mining Car
Before the mine car is used, it is necessary to add enough grease to each rotating wheel, and the rotating parts can be put into operation after adding oil or grease.
02
MPC2-6 Flat Mining Car
Easy to operate longer life
The whole vehicle adopts a rivet welded structure, which reduces the influence of the coping force on the mine car and increases the service life of the flatbed. It runs very smoothly in both corners and straights.
china coal
03
MPC2-6 Flat Mining Car
Scientific design quality assurance
The standard design of the car is convenient for maintenance, easy to disassemble, strong carrying capacity, long service life and small deformation of the table.
china coal
Quality service quality
Reputable · Full Range
requirements
MPC2-6 Flat Mining Car
-
01
Rated load capacity, designed to carry tonnage as needed;
-
02
Bearing area, design the width and length of the flatbed trailer as needed;
-
03
In the process of loading and unloading goods, try to avoid the occurrence of human behaviors such as impact and smashing.
-
04
The use of modified single-row radial ball bearings, even in the case of very harsh environment, uneven roads, severe dust, can still be used normally.
parameter
MPC2-6 Flat Mining Car
Model |
loading (kg) |
L(mm) |
W(mm) |
H(mm) |
Rail gauge(mm) |
Wheel Dia.(mm) |
Pulling Height(mm) |
Weight (kg) |
MPC2-6 |
2000 |
2000 |
880 |
410 |
600 |
300 |
320 |
490 |
MPC3-6 |
3000 |
2400 |
1050 |
415 |
600 |
300 |
320 |
530 |
MPC5-6 |
5000 |
3450 |
1200 |
480 |
600 |
350 |
320 |
900 |
MPC5-9 |
5000 |
3450 |
1320 |
480 |
900 |
350 |
320 |
910 |
MPC10-6 |
10000 |
3460 |
1300 |
304 |
600 |
250 |
230 |
910 |
MPC10-9 |
10000 |
3460 |
1300 |
304 |
900 |
250 |
230 |
1030 |
MPC13-6 |
13000 |
3350 |
1400 |
342 |
600 |
300 |
270 |
1015 |
MPC15-6 |
15000 |
3460 |
1300 |
357 |
600 |
300 |
320 |
1160 |
MPC15-9 |
15000 |
3460 |
1300 |
357 |
900 |
300 |
320 |
1240 |
MPC18-6 |
18000 |
3350 |
1400 |
346 |
600 |
300 |
270 |
1132 |
MPC20-6 |
20000 |
3460 |
1300 |
364 |
600 |
300 |
320 |
1240 |
MPC20-9 |
20000 |
3460 |
1300 |
364 |
900 |
300 |
320 |
1320 |
MPC25-6 |
25000 |
3460 |
1300 |
390 |
600 |
350 |
320 |
1750 |
MPC25-9 |
25000 |
3460 |
1300 |
390 |
900 |
350 |
320 |
1800 |
MPC26-6 |
26000 |
2400 |
1462 |
390 |
600 |
240 |
280 |
1133 |
MPC30-6 |
30000 |
3460 |
1300 |
400 |
600 |
350 |
320 |
170 |
MPC30-9 |
30000 |
3460 |
1300 |
400 |
900 |
350 |
320 |
1900 |