Two Link Chain
Power manufacturers assured purchase
Mine Car Bolt Pin
Mine Car Bolt Pins an indispensable component of the train transportation vehicle. The mine truck pin passes the pin hole and the chain ring on the transport vehicle, and the mine truck pin transports each section of the transport vehicle group into a train. The mine truck pin is used to prevent the use of the jump pin and the lock ring group on the vehicle to form a lock device, thereby ensuring the safety of the train operation and avoiding accidents of the skipping. Traction on the track by locomotive or hoisting winch.
-
Application and features
It is mainly used for the use of underground man-cars, fixed-vehicle-type mine cars, dump-type mine cars, open-box mine cars, and side-loading mine cars. Performance characteristics: It is made of high-quality steel forging and high strength.
-
The product is advanced in technology, stable
Specification (mm) : φ38 φ40
Outer diameter (mm): φ38±0.5 φ40±0.5
Working length (mm): 195~290
Permanent deformation of load test (mm): ≤7
Impact test impact energy (j): normal temperature: ≥ 48 low temperature: ≥ 20
Toothed Ring
Toothed Ring is suitable for the link connecting the high-strength circular chain of mining. The serrated connecting ring can be installed horizontally and vertically. This product has unique tooth shape design, tooth shape matching and convenient disassembly.
Two Link Chain
The two-ring chain is widely used. The product can be widely used in mine wells or on the ground to fix the car-type mine car and the flat-car transport of the flatbed and material vehicles. It can also be widely used for the connection of underground equipment transport vehicles.
-
Two Link Chain Uses
It is connected with bolts during installation and is an important part of the design and safety production in the mine lifting transportation system.
-
Two Link Parameter
Size Width Radius weight
32×140 58 126 60
34×147 64 136 65
38×145 80 160 77
Tri-ring Chains
The three-ring company is an important component for the connection of two-vehicle vehicles in China's mine ground and underground roadway narrow-gauge railway transportation vehicles. When using, put the swivel chain between the two cars, and then connect the upper and lower pin holes of the two ends of the swivel chain (the head block) through the bolts, and then lock the pin.
-
Tri-ring Chains Uses
The product can be widely used in mine wells or on the ground to fix the car-type mining vehicles and flat-bed vehicles and material vehicles for narrow-gauge transport vehicles. It can also be widely used for the connection of underground equipment transport vehicles.
-
Tri-ring Chains Parameter
Φ32×50×165 Load 137.2KN Breaking load: 784.5KN Bending performance: 180 degrees Material: 25#
lΦ32×60×140 oad 137.2KN Breaking load: 800KN Bending performance: 180 degrees Material: 25#
Wheel Cover
Wheel Cover is produced by stamping process, which realizes a complete set of mold planning and design, such as punching blanking, stretch forming, drilling finished products, etc., which has obvious advantages over other manufacturers' cast wheel end caps. The wheel cover can be tailored to your requirements!
-
Wheel Cover Advantage
1. High strength, good rigidity and light weight.
2. The surface roughness is small, the appearance is smooth and beautiful, no need to re-process, and the cost is low.
3. Stable quality and high dimensional accuracy.
-
Wheel Cover Parameter
Φ32×50×165 Load 137.2KN Breaking load: 784.5KN Bending performance: 180 degrees Material: 25#
Φ32×60×140 load 137.2KN Breaking load: 800KN Bending performance: 180 degrees Material: 25#
Rubber Bumpers
The rubber mine car meets the basic components of the car, frame, bumper, coupling and walking mechanism. The rubber mine car meets the frame as a metal structure, which can withstand the traction force, the braking force, the collision force between the mine cars and the impact force of the rail. The buffer is installed at both ends of the frame to mitigate the impact between the two cars.
-
Rubber Bumpersr Sructure
The structure comprises a body, the two sides of the body are provided with a card slot, one end of the body is provided with a positioning hole, and the middle portion of the body is provided with a jack that penetrates up and down; the body is mounted on the mine car through the card slot and the positioning hole. In the chassis.
-
Rubber Bumpers Classification
Mine car meets - the mine car is divided into fixed dumper type side discharge type, shuttle type and bottom discharge type according to the structure and unloading mode.
Mine Wheel Pair
The material of the ore wheel is generally two kinds of cast steel and cast iron. The cast steel ore wheel has a larger bearing capacity than the cast iron ore wheel and has a long trial life. It can produce and process various types of mine cars and mine wheel pairs.
-
Mine wheel Pair Uses
The mine wheels are used for underground mine roadway transportation, small and medium inclined wellbore, small inclined wells and mines for various side-turning, bottom-discharging and side-discharging mine vehicles.
-
Mine wheel Pair Parameter
Volume (m3): 1.1, 1.1, 1.7, 3.3
Carrying capacity (kg): 1800, 1800, 2700, 4000
Gauge (mm): 600, 600, 600, 600
Wheel diameter (mm): 300, 300, 350, 350
