MPC SERIES FLAT RAIL WAGON

Transportation

Able to withstand traction force, automatic force, collision force between mine cars and track impact force/simple structure/sturdy and durable/small electrical resistivity/large carrying capacity/easy to maintain/riveting structure/long service life/stable operation/

sales@chinacoalintl.com
+86-18660761375

Environmnet

MPC series flat rail wagon is suitable for the underground mining, underground tunnel andindustrial site surface transportation.

Flat Rail Wagon Application

To carry loads along assembly lines; transfer material from one work station to the next; store and transport an entire shift worth of production. They can even be used as a stable yet moveable machine base.

Flat Rail Wagon Features

The frame is designed into metal structure, which can withstand the traction,the car collision between impact force and the rail.

Simple structure, durable, small resistance coefficient,large capacity, easy maintenance.

Reduces the impact of stress and increases the service life by adopting the car frame in welding structure.

Ensure operating smoothly no matter on curve or straight rail.

Model Defination

For Coal Mine

Flatbed

Car/Vehicle

Loading Capacity t

---

Garuge

eg:MPC13-6 flatbed mine car

Meaning: 13T loading capacity, 600mm guage flat rail wagon for coal mine

Parameter

Pictures are for reference only as different product batch & specs.Please contact sales for confirm.

Model	Loading /t	Garuge G	Overall Dia			Wheel Base C	Wheel Dia D	Traction Height h	Rated Traction /kN	Min Radius of Runing Surface m
		Garuge G	Length L	Width B	Height H	Wheel Base C	Wheel Dia D	Traction Height h
		mm
MPC2-6	2	600	2000	880	410	550	300	320	60	9
MPC3-6	3	600	2400	1050	415	750	300	320	60	12
MPC5-6	5	600	3450	1200	480	1100	350	320	60	12
MPC5-9	5	900	3450	1320	480	1100	350	320	60	12
MPC13-6	13	600	3350	1400	342	1000	220	270	60	12
MPC18-6	18	600	3350	1400	346	1000	220	270	60	12
MPC26-6	26	600	2400	1462	390	1100	240	280	60	12
MPC10-6	10	600	3460	1300	304	1100	250	230	60	12
MPC10-9	10	900	3460	1300	304	1100	250	230	60	12
MPC15-6	15	600	3460	1300	357	1100	300	320	90	12
MPC15-9	15	900	3460	1300	357	1100	300	320	90	12
MPC20-6	20	600	3460	1300	364	1100	300	320	120	12
MPC20-9	20	900	3460	1300	364	1100	300	320	120	12
MPC25-6	25	600	3460	1300	390	1600	350	320	140	15
MPC25-9	25	900	3460	1300	390	1600	350	320	140	15
MPC30-6	30	600	3460	1300	400	1600	350	320	170	15
MPC30-9	30	900	3460	1300	400	1600	350	320	170	15
Note:Height H and Traction Height h measured since rail surface.

Working Principle

Driven by locomotive or winch, running alone railway underground mine or tunnel, transport mining materials and equipment.

Structure

Pictures are for reference only as different product batch & specs.Please contact sales for confirm.

Structure

mainly consists of frame, buffer device, wheel set( open-wheel, closed-wheel, connection device, etc.

The frame fashioned iron should be straightened not be larger than 1.5 ‰ before plug weld. Two frame sides parallel degree of tolerance for the length of 2 ‰.The flatness tolerance of the flame is 2 ‰ to the frame length (buffer not included ), but the max flatness tolerance should less than 5 mm.

The center of the frame surface traction device should be symmetry to the longitudinal center plane of the frame, and its symmetry tolerance should not exceed 6mm.

Close-Wheel Set Grease, dirt, the scrap iron and blockage should be removed before attempting assembling.

Wheel should not appear crack, 10 mm in length range appeared on top of the rim and the end part of the profile of tiny crack, should not be more than two.

Surface defects such as trachoma, porosity of round hole,that the area smaller than 16 mm2, the depth is less than 3 mm, 30 mm apart or more, shall not exceed three.

Open Wheel SetConstituted by wheel,shaft,bearing,etc.Its technical conditions comply with the provisions of "JB/T6992-1993". Clean the iron and blockages, and clean the parts before front wheel assembly,bearing should assembled by no shock load method, make sure the wheel rotation flexibility.

Bumper technical conditions in accordance with JB/T6992-1993 Buffer has enough strength, cushioning material toughness value of not less than 30J/cm2,cast steel bumpers there shall be no crack, on the surface of cast steel bumper bolt hole and end face not allowed any defects and shall not carry out welding.

Connection device is composed of connection three-ring chain, bolt. Connection three-ring chain conforms with the standard requirements of" MT 244.1 - 2005 coal mine narrow gauge vehicle fittings connection chain ". Connecting pin conforms with the standard requirements of"MT 244.2-2005 mine narrow gauge vehicle connector connecting pin".

Installation,Commissioning

Pictures are for reference only as different product batch & specs.Please contact sales for confirm.

Installation

Before assembling,all the parts should be inspection qualified. All parts should be clean, and assembly in a clean environment. Assembled dimension deviation: the total width of mine material car and the high traction deviation of ± 3 mm, total high deviation of ± 8 mm, length deviation of ± 10 mm. Deviation of the length of - 10 ~ 0 mm, width deviation of plus or minus 3 mm.

Commissioning

Observe whether the wheels rub on the track,handle it in time to prevent damage once the phenomenon occurs.

Observe whether tilt,out of orbit or overturned after it sliding along the slope curve and colliding with another car.

Observe the runing codition on the minimum radius of curvature of the track.

Test Run, Maintance Notes

Pictures are for reference only as different product batch & specs.Please contact sales for confirm.

Mine car should be without serious damage, wheels should be flexible, non-blocking.

Within six months from the received date, mine car damaged or not working properly due to poor manufacturing quality, supplier shall repair or replace for free.

Bearing cage opening towards out when replacing, maintain proper clearance.

Seals should be used the original distribution.

a.Operate strictly to the rules.

b.Do not allow overloading.

c.Do not do any cleaning during working process.