security precautions after engine started and when backhoe loader working:
1  After the engine started, preparing start after the brake pressure reach safe pressure,   to ensure traffic safety during braking.Press emergency brake bottom(if equipped ) and parking brake button ( the button can be pressed  only when the pressure reaches atmospheric pressure , otherwise it will automatically jump when pressed down), release  emergency and parking brake , to I started hanging block. If there is no emergency brake just put down the parking brake lever, start after parking brake  released.
2  Clear  failures matter on  backhoe loader walking path, with particular attention to iron, obstacles like ditches to avoid cut tires.
3  Adjust the rearview mirror to have the best vision effect .
4  Ensure  backhoe loaders horn, back lights, and all safety devices work properly.
5 In about to start  or check turning around flexible place, it should first horn to warn the surrounding personnel safety.
6  Before starting to walk, to deal with all of the joystick, pedals, steering wheel to try again, make sure in a normal state and the begin to enter working process. Pay special attention to check if  the steering, braking is intact.Make sure steering, braking completely normal before starting operation.
7  When walking, the bucket is placed around 400mm from the ground level. When the ramp job in the mountains or across ditches and other obstacles, should slow down, a small corner, to avoid tipping. When loading surface on the side of the steep begin to  slide , must be immediately unloaded, to prevent further slide.
8  Void too many tires and  too slippery; try to avoid dangling rounds ,forbid continue walking when two tires on the ground.

9  Use and  tractors, only allowed towing hitch,not allowed people stay between matter and  backhoe loaders, and to maintain a safe distance to prevent accidents.