PZB Series Explosion Proofing Shotcrete Machine
Advanced design concept,
sophisticated production equipment
Introduction of PZB Series Explosion Proofing Shotcrete Machine
Integrity Management, Excellent Quality, Factory Direct Sales
build china coal brand
Factoty Price · Quality Assurance
PZB Series Explosion Proofing Shotcrete Machine is suitable for dry spray and wet spray concrete. It is a new technology for concrete jet injection. It is an optimized and improved replacement product. It adopts straight-through material cavity and smooth discharge. It has strong ability to process mixed wet materials and blank material. Delayed, less residual material, low dust, single point compression, easy adjustment, easy maintenance, rubber sealing plate has long service life, small volume, strong maneuverability, low feeding height and low labor intensity.
01
efficiency time saving high quality
Straight-through rotor type non-bonded material cavity, smooth discharge, high efficiency and time saving. New nozzle, discharge elbow device, improve spray effect, less rebound, high spray quality.
02
Good sealing effect and long life
Four-point elastic compensation is compacted, the sealing effect is good, the dust near the machine is less, and the wearing parts have a long service life.
The agitated material is supplied to the jet hopper through the vibrating screen through the discharge port of the batching mixer, and is injected into the straight material cavity of the rotor body by the dipper, and is rotated to the discharge port, where it is rotated. The air chamber is supplied with compressed air to blow the material into the discharge elbow.
Here, another pressure is introduced by the cyclone, and the material is blown, accelerated, and rotated, floated, and entered into the air in a multi-head wind spiral state. Feed the tube, reach the nozzle and add a small amount of supplementary water or liquid accelerator.
03
Uniform flow continuous and stable
The low-pressure high-speed vortex airflow is used to overcome the problems of bonding, blockage and pulse breakage in material transportation, and the flow is uniform and continuous.
Quality service quality
Reputable · Full Range
parameter of PZB Series Explosion Proofing Shotcrete Machine
Integrity Management, Excellent Quality, Factory Direct Sales
Item |
PZ-5B |
PZ-5B |
Output |
5m3/h |
5m3/h |
Max. convey dist Horizontal: |
200m Vertical: 20m |
Horizontal:200m Vertical: 20m |
Water cement ratio |
≤0.4 |
≤0.4 |
Max. Aggregate. size |
20mm |
20mm |
Hose inner size |
51mm |
64mm |
Operating air pressure |
0.4~0.6MPa |
0.4~0.6MPa |
Air consumption |
7-8 m3/min |
8-10 m3/min |
Rotor diameter |
438mm |
438mm |
Motor power |
Y132m-6-5.5(KW) |
Y160m-6-7.5KW |
Voltages |
380v or as your requirement |
380v or as your requirement |
Overall dimension(mm) |
1600X700X1150 |
1600X700X1150 |
Whole weight |
800kgs |
900kgs |
detail of PZB Series Explosion Proofing Shotcrete Machine
Integrity Management, Excellent Quality, Factory Direct Sales
attention of PZB Series Explosion Proofing Shotcrete Machine
Integrity Management, Excellent Quality, Factory Direct Sales
-
1
1. After the shotcrete is finished, operate in the order of stopping the material first, then stopping the water, then stopping the power and finally closing the wind.
-
2
2. After the spraying work is finished, unload the nozzle, clean the water ring and the mortar or material inside and outside the jet, and wind the wind pipe.
-
3
3. Clean up and collect the rebound material, and use the net for the shift.
-
4
4. Sprinkle water maintenance after 2 hours of spraying, and check the strength after 28 days.
Complete certificate service global market