Application of YO18 Pneumatic Jack Hammer Air Leg Concrete Rock Drill
YO18 Pneumatic Jack Hammer Air Leg Concrete Rock Drill is a hand held pneumatic tool which using compressed air to push the piston reciprocating movement, keeping the pick up to the impact.
Pneumatic pick is tool that is often used in excavating, geology or destroying hard or frozen stratum and other occasions. It somewhat resembles a construction hammer, except that it usually has a long, pointed tip on the end.
YO18 Pneumatic Jack Hammer Air Leg Concrete Rock Drill is designed to chisel through and break up rock in locations where using powered equipment might be impractical.
Applications of YO18 Pneumatic Jack Hammer Air Leg Concrete Rock Drill
The pneumatic pick is suitable for drilling in mine,metallurgy, railway, transportation,water conservancy, infrastructure
and defense engineering, crushing incompetent bed, concrete and clay, destroying hard or frozen stratum and other occasions which need impact.Its an ideal machine for construction and back out of mines, bridges, roads, water pipes and electricity grids.
Parameter of YO18 Pneumatic Jack Hammer Air Leg Concrete Rock Drill
Hand Hold Rock Drill
|
YO18
|
Total Length (mm)
|
50
|
Weight (Kg)
|
18
|
Cylinder Diameter (mm)
|
58
|
Piston Stroke (mm)
|
45
|
Air Pipe Inner Diameter (mm)
|
19
|
Working Pressure (Mpa)
|
0.35-0.63
|
Impact Energy (J)
|
≥22
|
Impact Frequency (Hz)
|
≥32
|
Air Consumption (L/s)
|
≤20
|
Water Pipe Inner Diameter (mm)
|
8
|
Rock Drill Hole Dia (mm)
|
34~42
|
Rock Drill Hole Depth (m)
|
5
|
Shank dimensions (mm)
|
22×108
|
Water pressure (Pa)
|
3.9-5.9×105
|
Average speed (at 3.9×105Pa )
|
80mm
|
Torque (at 4.9×105Pa)
|
7.85N / m
|
Average speed(at 4.9×105Pa )
|
120mm
|
Pictures of YO18 Pneumatic Jack Hammer Air Leg Concrete Rock Drill