Introduction of PRC Series Coal Mine Level Roadway Man Car
The coal mine level man cars are pulled by traction locomotives and run in columns. In order to be smooth during operation, a spring buffer device is added. When starting or stopping, it can be kept stable. There is a buffer spring on the vehicle's traction device
Introduction of PRC Series Coal Mine Level Roadway Man Car
1. There are front and rear plates and metal canopies for the PRC laneway passenger carriages. The exterior steel plates of the carriages are made of 2mm thick steel plates. The interior uses 0.5mm thick stainless steel plates for the carports. The lower part of the car body uses yellow enamel and the upper part uses blue enamel. The body is streamlined, and the carport uses thick square tubes as the skeleton. The car floor adopts pattern steel plate and the chassis brush anti-rust paint. Install high-strength steel car chairs, 12 per car. The outside of the car body should be equipped with indicator lights (LED explosion-proof type) on both sides, each car must be no less than 6 inches (a car has a current source).
2. The open wheel pair uses tapered roller bearings (30310 type); the material of the meeting head is polyurethane, and the installation type is single-head type; the coupling adopts locking structure, and the steering gear, coupling and bumper adopt spring shock absorption.
Application of PRC Series Coal Mine Level Roadway Man Car
The level man car is mainly used in underground mines that do not exceed 26 feet in slope and is used for transporting mine workers. The PRC level man car can transport wounded and sick people and other disaster relief materials, and is towed by motor vehicles to run in groups. This coal mine man car transport personnel can improve working conditions, reduce the exertion of staff, ensure the safety of transportation, and increase production efficiency. It is one of the indispensable transportation facilities for mine safety production and modern mines.
Parameters of PRC Series Coal Mine Level Roadway Man
|
Model
|
PRC6
|
PRC12
|
PRC18
|
|
The number of the bearing
|
6
|
12
|
18
|
|
Maximum speed m/s
|
3
|
3
|
3
|
|
Largest traction KN
|
30
|
30
|
30
|
|
Horizontal turning radius m
|
8
|
8
|
8
|
|
Gauge mm
|
600
|
600
|
0.762/0.900
|
|
led high degree m
|
0.38
|
0.38
|
0.38
|
|
Long mm L
|
3.1
|
4.28
|
4.28
|
|
Width mm W
|
1.02
|
1.02
|
1.3
|
|
Height mm H
|
1.58
|
1.552
|
1.552
|
CarPhotos of PRC Series Coal Mine Level Roadway Man Car
