Introduction of HRMK-AE102A Oxygen Filling Pump
The main usage of Oxygen Filling Pump is for pimping oxygen,hydrogen, nitrogen and other gases out of gas bottle and refill it into inflatable bottle,making the pressure increase to 20MPa/30MPa.
This product just need to take 14 seconds to inflate gas into a 2L cylinder from 10MPa to 20MPa, much far beyond the standard of
50 seconds stipulated by the state.
Advantages of HRMK-AE102A Oxygen Filling Pump
1, Suitable for oxygen and non-flammable gas filling
2, High Efficiency, Superior to national standards
3, Rigorous product structure, small size, light weight
4, Simple operation, easy maintenance, low cost of use
Parameters of HRMK-AE102A Oxygen Filling Pump
Model: HRMK-AE102A
Inflating pressure: 30MPa
Air Displacement under Suction: 3L/min
Compressed Series: 2-level compression
Maximum compression ratio: 8
Crankshaft Rotation number: 440min-1
Plunger Stroke: 30mm
Plunger Diameter: Φ18mm first level Φ18mm second level Φ12mm
Three-phase Motor: Y100L1-4 380V 2.2kw 1430r/min
Dimmension: （940×500×700）mm
Quality: 120kg
Instruction of HRMK-AE102A Oxygen Filling Pump
This Product is an oxygen filling equipment for making the oxygen in the gas bottle be up to required pressure by improving pressure to lift the oxygen from the cylinder to another cylinder.
Function of HRMK-AE102A Oxygen Filling Pump
Oxygen Filling Pump mainly applies to gas booster pump that is used to fill oxygen respirator and gas cylinder with compressed oxygen and high pressure for self rescuing. It is improving pressure to lift the oxygen and other inflammable gases from the cylinder to another cylinder, allowing to automatically control the filling pressure. Widely used in the fields of medical treatment, fire protection, aviation, landification, metallurgy, ships and other places using gas.
