Navigation

sail Online
Visited by mobile
back top

AE102 Breathing Respirator Oxygen Filling Pump

It is an oxygen filling equipment that step up oxygen pressure from source bottle to another gas bottle, let the oxygen pressure of this gas bottle achieve the needed pressure.

Email:sales@chinacoalintl.com
Tel:+86-537-2350961

Category

Menu

weixin

AE102 oxygen filling pump

Product Introduction

AE102 oxygen filling pump

AE102 Breathing Respirator Oxygen Filling Pump is mainly used for mining ambulance service and was filling oxygen respirator.

compression oxygen for oxygen tanks, and save for chemical, oil, medical, fire control and other relevant station fill oxygen when used.

AE102 oxygen filling pump

Ae102 Respirator Oxygen Filling Pump

Characteristic

AE102 Breathing Respirator Oxygen Filling Pump is an oxygen filling equipment that step up oxygen pressure from source bottle to another gas bottle, let the oxygen pressure of this gas bottle achieve the needed pressure. It is used for pump oxygen, nitrogen and carbon dioxide from source gas bottle and fills in the gas bottle which is waiting for inflating.

AE102 oxygen filling pump AE102 oxygen filling pump

AE102 oxygen filling pump

Working Principle

AE102 oxygen filling pump

Oxygen filling pump completes the oxygen filling work through the compressor plunger constantly reciprocating motion. Suction valve, exhaust valve equipped at both ends of first and second stage cylinder to control a certain direction of the air flow, and quality of of suction valve and exhaust valve have a more significant impact on speed of inflation.

AE102 oxygen filling pump
AE102 oxygen filling pump

When the primary plunger down movement, gas of first stage cylinder along with the expansion, the pressure is reduced,

AE102 oxygen filling pump

when the pressure inside the first stage cylinder is lower than the gas pressure in the gas cylinder,

AE102 oxygen filling pump

first stage suction valve automatically open, gas flows from gas cylinder to first stage cylinder.

AE102 oxygen filling pump

When the first stage plunger upward movement, gas in cylinder is compressed, the pressure increased, when the pressure is greater than the secondary stage cylinder gas pressure, the first stage cylinder exhaust valve and second stage cylinder suction valve are open, gas from first stage cylinder will flow into the second stage cylinder;

Oxygen filling pump completes the oxygen filling work through the compressor plunger constantly reciprocating motion. Suction valve, exhaust valve equipped at both ends of first and second stage cylinder to control a certain direction of the air flow, and quality of of suction valve and exhaust valve have a more significant impact on speed of inflation.

AE102 oxygen filling pump

Technical Parameter

Main specification
Item Specification
Max exhaust pressure 30MPa
Exhaust Capacity while pumping 3L/min
Grade of compress Grade 2
Max compress rate 8
Revolution of crankshaft 440rmp
Plunger stroke 30mm
Plunger diameter
Grade one Φ18mm Grade two Φ12mm
Power of motor 2.2kw
Rotate speed 1410r/min
Voltage of motor 380V/50Hz
Dimensions 860X565×640mm
Weight 116kg

Product Feedback

Average Star Rating:

History Feedback: (0)

Latest Feedback

    Star Rating:


    Click to replace the verification code. Refresh
    
    skype sail Online Email:sales@chinacoalintl.com
    menu
    Home Products Top

    +

    +

    Please leave a message

    Related Products